Home / How To / Make a rain garden on your farm

Make a rain garden on your farm



Rainforests regenerate runoff in water for plants, which offers countless benefits. Clearing excess rain protects the foundation of the building, helps restore underground water bodies, processes chemicals and bacteria trapped in runoff, and prevents bugs from setting up breeding grounds near your home. To transform your farm into an oasis where plants can deliver these miracles while blooming in shrubs to wildlife, flowers for bees or delicious herbs to your kitchen, follow these simple steps.

Step 1 – Plan Your Rain Garden

To find the ideal location, use a level and a straight board to determine where your farm has a slope. If the yard is completely flat, you have to create an inclined area or drainage grass to steer the water where you want it to go. For optimal flow, the slope should be at least one inch each for four to five feet.

Rainforests are most effective when located near low points, highways, sidewalks and backspouts. The garden should be at least 1

0 meters from the house to avoid the risk of a route or flood. If you want to control the rain more directly, you can run PVC pipes underground to channel rainwater from one or more gutters.

You can also choose to add river rock or other large landscape restrictions for direct water. You can build a berm in the low place and add swales (weakly submerged channels) to help with direct drainage from the higher surfaces of the yard. Avoid placing a rain forest over any underground tools or septic tanks.

 water extends along a canal dug in dirt

Step 2 – Testing your drain

Once you have a site picked up, you want to decide how deeply plant your rain garden. It depends in part on your soil's absorption rate, because you only want your garden to collect the amount of water that can be absorbed in about two days.

Test your soil by digging a hole, filling it with water and timing how fast it drains If the level goes down about half an inch every hour, the garden will absorb about one inch of water every two hours, or 12 inches for 24 hours so a depth of six to twelve inches should facilitate drainage over one to two days. [19659005] If your soil drains very slowly, you might want to change the mix to include more peat moss, compost and / or sand. Depending on how much rainfall your area gets, you may want to place some stones around the edges of your garden to help with drainage at abundance.

 pink lilies

] Step 5 – Choose your plants

Domestic plants will do the best in the rainforest, so choose the flora that thrives in your zone. Popular options include sedge, sedum, daylily, artemisia, aster and cornflower. Plants with deep root systems, such as wildflowers, shrubs and grass, also tend to thrive in sometimes high humidity environments.

Place plants with lower water requirements along the right edges of your garden. Remember that you don't want plants that need to be wet all the time, because your goal is to create a garden that drains all rain out in a day or two.

Step 6 – Plant

First-year care is crucial to getting started on the right foot. Incorporate some sand, mulch, fertilizer and / or compost in your planting soil to maximize drainage and nutrition. Shredded hardwood milk is a good choice, as it is heavier than wood chips and pine bark, which will flow out of the garden when it is filled. Your young plants will set up their roots, so you don't want the soil to become saturated, leading to root rooting.

If you notice that your new garden takes more than 48 hours to drain, dig a small hole in the berm on the lowest part of the rainforest to allow some water to flow out. This will help young plants absorb too much water prematurely. Adding decorative stones to the incoming edge of the tree will also help keep your baby plants washed away.

During the dry season, make sure your garden gets about an inch garden each week. Other than that, your domestic rain garden should require very little attention to remain healthy and productive over the coming years.


Source link