Breaking News
Home / How To / How to water aerial plants

How to water aerial plants

Air plants, also known as Tillandsia, are popular, low-maintenance potted plants that do not grow in soil. Instead, they extract most of their nutrients needed from the air! To keep your air plant healthy and happy, it needs water about once a week. Bottled water or filtered tap water works best – avoid watering your air plants with distilled water as the distillation process removes important nutrients.

[ Edit ] Step

[ Edit ] Soaking Loose Air Plants

  1. Fill a clean tub, bucket or sink with bottles or filtered tap water. Choose a container or containers that can easily hold all your aerial plants. Add bottled water or filtered tap water at room temperature to the container. Make sure you use enough water to completely immerse each lump. [1]
      Aquatic air plants Step 1.jpg
    • Always clean the container before using it to water your aerial plants.
    • Avoid using distilled water for this as the distillation process removes important nutrients. [2]
  2. Immerse your aerial plants in the water. Aerial plants do not grow in pots or soil, so you can easily collect the small, loose lumps with your hands. Place each lump in the water bath and slide it below the surface. You can soak several aerial plants at the same time. [3]
      Aquatic Air Plants Step 2.jpg
    • If your air system is mounted on a surface, such as a heavy shell or some driftwood, you will probably need to drop it instead of under water.
  3. Soak the plants for 20-30 minutes and shake off excess water. The aerial plants can float to the surface when they get wet, which is good – just make sure that the majority of each lump remains submerged for a full 20-30 minutes. Then take each lump, remove it from the bath and shake it off to get rid of excess water. [4]
      Aquatic Air Plants Step 3.jpg
    • Excess water tends to accumulate between the center leaves unless you give them a gentle shake first, which can eventually lead to rats and other problems.
    • If your air plants are particularly dry, leave them in the water for up to 1 hour. [5]
  4. Place each lump upside down on a paper towel to air dry completely. Air drying usually takes about 30 minutes, but large or intricate lumps can take longer. You can touch the center blade with your fingertips to check for moisture. Return the plants to their original places when they are completely dry. [6]
      Aquatic air plants Step 4.jpg
    • Always place lumps upside down to air dry so that excess moisture can drain away. 19659009] Repeat this process every week to keep the air plants healthy. If the leaves look pale green and feel soft, water the plant more often. Curled or rolled leaves also indicate dehydration. [7]
        Water aerial plants Step 5.jpg
      • During the winter months, you can reduce watering to every two weeks. [8]

[ Edit ] Misting Mounted Air Plants

  1. Fill a plastic spray bottle with bottled water or filtered tap water. Use room temperature water for best results. Be sure to avoid using distilled water, which does not contain the necessary nutrients that your aerial plants need to thrive. [9]
      Water aerial plants Step 6.jpg
  2. Spray each lump generously until the water is dripping from the leaves. Misting delivers enough water to your air system as long as you are generous and careful. Measure the plant until water flows out of the leaves. [10]
      Aquatic aerial plants Step 7.jpg
    • Mounted aerial systems often need to be drained because the object to which they are attached cannot be immersed in water. If the object is porous, bulky or heavy, it is better to lose the plants.
  3. Mist your aerial plants at least once a week to keep them hydrated. Because they are tropical or subtropical in nature, aerial plants will not last long without even moisture. [11] Lose them thoroughly at least once a week.
      Water Air Plants Step 8.jpg

    [19659009VattnadinaväxteroftareomdumärkerteckenpåuttorkningLuftväxterkanlättaretorkautomduintekansänkademivattenFörattförhindrauttorkningletaefterbladsomkännsmjukaellerserljusgrönautBladenkanocksåkrullasellerrullauppnärdeärdehydratiserade [12]

      Water Air Plants Step 9.jpg
    • Extremely dehydrated leaves can become brown and brittle at the tips. [13]
    • A hydrated air system looks lush with darker green leaves.
  4. Place mounted air systems in a place with good air circulation. Excessive moisture can cause air plants to rot. Keeping air systems mounted in an area that gets plenty of air circulation so that the blades can dry completely after each misting session. [14]
      Water Air Plants Step 10.jpg
    • For example, a spacious, clean room that gets a lot of light is a great place for your aerial plants.
    • Make sure that the surface on which your air conditioner is mounted does not hold or absorb water. For example, cork would not be a good surface because it absorbs water like a sponge.

[ Edit ] Tip

  • If you live in a frost-free environment, you can keep your air growth out. Otherwise, keep it indoors so that it stays warm and plan to water it more often than you would water an air conditioner kept outdoors in hot, humid climates.

[ Edit ] Need

[ Edit ] Soaking Loose Air Plants

  • Bath, bucket or sink
  • Bottled water or filtered tap water
  • Paper towels

[ Edit ] Misting Mounted Air Plants

  • Plastic spray bottle
  • Bottle or filtered tap water

[ Edit ] [19659055] References

  1. tu 1919909058 ↑↑ v = xCqAJh0vv1k & feature = & t = 125
  3. / air-plants /
  5. ctsheet / air-plants /
  6. ants / air-plants.html
  7. https: //hortnews.extension.iastate .edu / 2019/12 / all-about-air-plants
  8. https: // www.
  9. https: //
  10. [1945
  11. Tue 1919909069 1945

Source link