Breaking News
Home / How To / How to tie the strings in a double knot

How to tie the strings in a double knot

A double knot is a great way to keep your shoelaces tied, so you do not have to worry about them regretting and possibly tripping over them. You can also use a double knot when your shoelaces are too long to prevent them from pulling or getting caught by mistake. To tie your laces in a double knot, start with a regular shoelace bow knot. Note that it will be difficult to make a double knot if your laces are very short after you have tied them in a regular shoelace.


[[[[Edit]Make a double double knot

  1. Tie your shoelaces in a regular knot. Make a loop with one end of the strings by doubling it over itself. Fold the other end of the strings around the base of the loop you created, then push it through the hole you just made by wrapping it and pulling it into another loop. Pull both loops in opposite directions to tighten the bow knot.[1]
    Tie the strings in a double knot Step 1 version 2.jpg
    • For best results when tying a double knot, make sure the loops and strings are even on both sides of your knot.
    • Use this method if you have problems with your tips regretting all the time or if they are too long and you want to keep excess length out of the way.
  2. For the left loop over the top of the right loop and wrap it around the back. Pinch the right loop between your thumb and forefinger on your right hand. Grasp the left loop with your thumb and forefinger on your left hand and then wrap it on top and around the right loop.[2]
    • This is basically the same thing you did when you created the second loop for your regular bow knot, except this time you do it with the loop you have already done.
  3. Pass the tip of the left loop through the hole created between the loops. Slide the left loop into the small hole you made by wrapping it over and around the right loop. Slide the tip of the loop through the hole until you can grab it from the other side.[3]
    • When you pull the left loop through the hole, pull it to the right.
  4. Pull the loops in opposite directions to tighten the double knot. Grasp the left loop, which now goes to the right, with your right hand, and the right loop, which now goes to the left, with your left hand. Pull them firmly until the knot is tight.[4]
    • To untie this regular double knot, just work with your fingertips between the knotted loops to loosen them and pull them apart. Then you can loosen the usual bow knot as usual by pulling on the straight loose ends of the string.

[[[[Edit]Create a simple release double knot

  1. Make an overhand knot like you would to start a regular bow knot. Folded right tip over and under left tip or vice versa. This is exactly the same as the first step to tying your strings to a normal bow knot.[5]
    • Use this method if you want a double knot that you can quickly untie by pulling the strings instead of selecting them to loosen them.
  2. Loop the 1 end of the tip over the other end again in another overhand knot. Fold the right tip over the left tip again or the left tip over the right tip again, depending on which way you wrapped them to begin with. This is exactly the same as making the first overhand knot.[6]
    • Your strings will now look like a simple knot with 3 loops instead of the usual two loops.
  3. Make two bow loops just as if you were tying a regular bow in your strings. Pinch the right end of the tip in a loop and wrap the left tip around it. Slide the left tip through the space between the strings that you created by wrapping it and then pulling it to a second loop.[7]
    • This is exactly the same process as when you tie a regular knot.
  4. Fold the left loop around the right loop and pull it through the hole it creates. Slide the left loop over the right loop and pull it around the back. Slide it through the space between the two loops and pull it through to create a double knot.[8]
    • This is the same as tying a regular double knot. What makes it quick to release is the extra overhang at the beginning.
  5. Tighten the double knot that is easy to loosen by pulling on both loops. Grab the loops, 1 in each hand, and pull them in the opposite direction. Stop pulling when the knot is completely tight.[9]
    • To loosen this quick coupling, simply pull on one of the loose straight ends of the strings.


  • A double knot is quite bulky, so it’s great if you want to tie some long strings on something like a pair of hiking boots to keep them from pulling or to prevent them from getting caught in something in the woods.[10]


  • Keep in mind that the usual double knot is not as quick to loosen as a knot. If you want to be able to untie your laces and take off your shoes faster, go for a simple release double knot.[11]



Source link