Home / How To / How to tie a dimple

How to tie a dimple



A knot thread refers to the small indentation in the middle of a tie near the top of the knot. It adds another dimension to your outfit by giving your tie a little personality and class. A pit can be applied to all types of ties, although they often occur with Eldridge, Capsule and Nicky. To add your pit, tie the tie as you normally would and stop just before you get to the part where you tighten the knot. Then you can choose to add your pit from the top or bottom of the knot.

[[[[Edit]Step

[[[[Edit]Tie your tie

  1. Choose your tie and set the length before making the knot. Choose the tie you think fits best with your outfit. Rich the blade and tail up over the shoulders to adjust the length. Then start assembling the knot. A pit can easily be added to any kind of knot, so it does not matter which special knot you choose.[1]
    Tie a dim step 1.jpg
    • The blade refers to the larger piece of fabric that hangs in front. The tail is the thinner part of the tie that sits behind the blade.
  2. Stop tying the tie at the point where you are securing the knot. When you get to the part where you pull the blade all the way through the knot to tighten the knot, stop. Slide the blade 3/4 of the way through the knot and let the strap hang gently. Leave at least space between the part of the blade that is circled over the knot and the top of the knot itself.[2]
    Tie a dim step 2.jpg
    • Hold enough slack in the blade and the knot to reach between the space where the front of the knot covers the blade.
  3. Align your tie and check the length before adding the pit. Make sure that the knot is mounted perfectly and that the blade is in perfect length before proceeding. The bottom of the blade should rest over your belt buckle, so if there is space left between the top of the blade and the knot, the blade should hang approximately above the belt buckle.[3]
    Tie a dim step 3.jpg
    • You cannot add a pit after tightening your tie, and the pit will not look nearly as good if you loosen the knot after laying it to adjust the length of the tie.
    • If you need to reassemble the knot or adjust the length, repeat these steps to create a new knot.

[[[[Edit]Fold the trap from above

  1. Slide the thumb under the loop on top of the knot. Put your thumbs down under the part of the leaf that loosely protrudes over the upper part of the knot. Aim the palms upwards so that you hold the loop with your thumbs. Keep your hands as symmetrical as possible for an even pit.[4]
    Tie a dim step 4.jpg
    • It is a little easier to fold the pit from above than to add it from below, but you have less control over the size of the pit.
  2. Squeeze the fabric inwards with both index fingers. Slide your index fingers over your thumbs and squeeze them inwards to put a seam in the loop. Transfer your grip on the loop to your non-dominant hand and hold the loop in place.[5]
    Tie a dim step 5.jpg
    • You do not need to squeeze hard to hold the edge in place.
  3. Push the blade down through the knot. Grasp the blade just below the knot with your dominant hand. Maintain the pit loop with your non-dominant hand. Slowly pull down the blade to tighten the knot.[6]
    Tie a dim step 6.jpg
  4. Secure the pit by sliding it through the back of the knot. While pulling the blade to tighten it, hold the edge with your non-predominant hand. Slide the pit through the front of the knot. The targets slide behind the front of the knot and come out from under it. Pull the blade all the way back to tighten your tie and secure the pit.[7]
    Tie a dim step 7.jpg
    • Memories should be in the middle of your tie. If it is not, you may be able to adjust the tie by dragging the impression in the pit to the left or right.

[[[[Edit]Add the dimple from below

  1. Squeeze in the middle of the blade just below the knot with your index finger. Grasp the edges of your leaf just below the loose knot. Use your index finger to apply pressure to the center of the fabric and add your pit. Hold the fabric in place with your thumb and middle finger while maintaining the pit with your index finger on the same hand.[8]
    Tie a dim step 8.jpg
    • Some people use their non-dominant hand to do this while others prefer their dominant hand. Do what feels most comfortable for you.
    • Adding a pit from below requires a little more dexterity, but you have more control over the location and size of the pit.
  2. Gently grasp the sides of the knot with your other hand. Use your free hand to grasp the edges of the knot in the lower edge of the fabric. Do not push in or pull on the knot – the goal here is to simply stabilize it while tightening your tie.[9]
    Tie a dim step 9.jpg
    • Of course, most people press the knot a little when they normally tie. Resist the urge to do this, as the pit will be harder to hold in place if you do not leave some room inside the knot.
  3. Pull down the blade. Start pulling down the blade to tighten your tie with which hand you are holding the pit with. After pulling the tie, slide your index finger upwards towards the knot to move the pit upwards.[10]
    Tie a dim step 10.jpg
  4. Tighten the knot slowly as you slide the hole up the blade. Use your other hand to brace the knot and keep the shape of your tie. Continue to pull down the blade and push the pit up until your tie is tight.[11]
    Tie a dim step 11.jpg
    • If the angle of the pit is slightly off, gently pull the fabric under the knot to adjust the shape of the pit.

[[[[Edit]tip

  • Whether you add your pit above or below the knot, it really is a matter of personal preference. Try both ways to find out what feels right for you.

[[[[Edit]references

  1. https://www.esquire.com/style/mens-accessories/advice/a18471/tie-dimple-how-to-051313/
  2. https://www.gq.com/story/how-to-tie-a-tie-the-right-way-gq-guide
  3. https://www.gq.com/story/how-to-tie-a-tie-the-right-way-gq-guide
  4. https://youtu.be/Nfpbu1t34RA?t=23
  5. https://youtu.be/Nfpbu1t34RA?t=23
  6. https://youtu.be/Nfpbu1t34RA?t=31
  7. https://youtu.be/Nfpbu1t34RA?t=31
  8. https://youtu.be/Nfpbu1t34RA?t=48
  9. https://www.esquire.com/style/mens-accessories/advice/a18471/tie-dimple-how-to-051313/
  10. https://www.esquire.com/style/mens-accessories/advice/a18471/tie-dimple-how-to-051313/
  11. https://www.esquire.com/style/mens-accessories/advice/a18471/tie-dimple-how-to-051313/

Source link