قالب وردپرس درنا توس
Home / How To / How to Spiral Tie Dye

How to Spiral Tie Dye



Tie dyeing is a great way to make a plain, white garment look more interesting and colorful. The most popular design is the spiral. The trick to getting the design is to turn the shirt into a disc and then wrap rubber bands around it. T-shirts are the most popular for dyeing, but you may be able to use other items, such as sarongs.

[ Edit ] Step

[ Edit ] Tying and Soaking the Fabric

  1. Get a white, 1
    00% cotton T-shirt that you want to associate color with. It may be brand new or an older shirt. If the shirt is brand new, first wash it to remove any coatings that may prevent the dye from sticking. If it is an older sweater, make sure it is clean. You can also use other items, such as sarongs and pillowcases as long as they are white and 100% cotton. [1]
      Spiral Tie Dye Step 1 Version 2.jpg
    • Do not use colored objects, or the dye won will not show up. The fabric must also be 100% cotton for the dye to be attached.
    • Objects with large surface areas work best. Something like a pair of shorts or socks will be difficult to turn into a spiral.
  2. Spread the shirt out on a smooth, flat surface. You will not paint on this surface, so it can be anything, as long as it is flat and stiff. A table or wooden floor works best. Do not work on carpet, grass or concrete; the structure will create too much friction for the twisting part.
      Spiral Tie Dye Step 2 version 2.jpg
    • If you tie something else, make sure you also spread it flat.
  3. Place a fork in the middle of the sweater with the pins facing down. The fork should be perpendicular to the shirt and surface on which you are working. [2] Alternatively, squeeze the waist of the shirt between your thumb and forefinger. This will be the center of your spiral.
    • For a more unique design, pinch anywhere else on the shirt. For example, you can squeeze in the upper right corner or the lower left corner.
  4. Use the fork to turn the shirt into a disc. Turn the fork between your fingers until the shirt begins to gather in a spiral. After twisting the shirt as much as you can, use your hands to finish fixing any loose pieces of fabric to the bundle. [3]
    • This is a bit like meandering spaghetti around the shavings of a fork.
    • You can turn the shirt clockwise or counterclockwise.
    • If you squeeze the fabric with your fingers, just turn your hand like turning a key. You must squeeze and adjust your hand after each twist.
  5. Fold 3 to 4 rubber bands around the disc. Wrap the first 2 rubber bands around the helical disk to get a cruciform shape. Add 1 or 2 rubber bands to secure the bundle. Make sure all the rubber bands meet in the middle. [4]
    • Place the rubber bands evenly, like the numbers on a watch, or just turn them around randomly.
    • If the bundle feels loose, you can add some rubber bands.

[ Edit ] Preparing Soda Ash and Dye

  1. Put on a pair of plastic gloves and a dust mask. Soda and dye can irritate the skin and cause allergic reactions, so put on these gloves. The fine particles in soda and powdery dyes can also irritate the lungs, so a dust mask would also be a good idea. [5]
    • Not all fabric colors require soda. Check out the instructions on the dye package.
    • It would be a good idea to put on an old set of clothes or an apron. This way, you do not risk accidentally staining your clothes.
    • Work outdoors, if possible. If you can't, you can cover the workspace with a plastic cloth or several layers of magazines.
  2. Mix 1 cup (598 g) of soda with warm water. Pour hot water into a large bucket and then stir in 1 cup (598 g) of soda. Soda is the magic ingredient that will put the dye into the fabric without the use of heat or constant soaking. [6]
    • After adding the T-shirt, the water level will rise, so make sure the bucket is big enough. Something that can hold would work.
  3. Select the desired colors for fiber reactive dyes. These dyes are wonderful for tie dyeing because you do not need heat to activate them. You also do not have to leave the fabric in the dye for a long time. This makes it easy to apply several colors at once. [7]
      Spiral Tie Dye Step 8 Version 2.jpg
    • You can get fiber reactive dyes online. Fabric stores and craft shops also sell them, but usually in kits.
    • Fiber reactive dyes are available in powder form, but not all powder dyes are fiber reactive. Read the label!
    • How many colors you choose is up to you. Most stick with two colors, but you can use anywhere between 1 and 4 colors.
  4. Mix the dye with the amount of water recommended on the package. Each dye will require a different amount of water. If your fiber-reactive dye came in a plastic bottle, you will probably need to fill the bottle to the filling line with water. Read the instructions again. [8]
      Spiral Tie Dye Step 9 Version 2.jpg
    • If your dye came in a package, mix the dye in a jar first and then transfer it to a plastic press bottle.
    • Some dyes can be mixed in advance and stored indefinitely, while others must be used immediately. Read the instructions in your dye.

[ Edit ] Soaking and Dyeing the Fabric

  1. Soak the sweater in the soda solution for 10 to 20 minutes. Dunk the shirt in the soda solution and then squeeze it to make sure it is thoroughly soaked. Leave it in the bucket for 10 to 20 minutes. [9]
      Spiral Tie Dye Step 10 version 2.jpg
    • If the shirt floats in the water it is not wet through. Squeeze it out a little more, or let it soak longer.
    • You can remove the dust mask at this point because soda and toner are dissolved. However, you should keep gloves and old clothes / apron on.
  2. Remove the shirt and squeeze out the excess soda solution. After that you do not need the solution of the soda ash again, so drop it off. If you dye more shirts, however, leave them in the bucket and soak the rest of your desired items. [10]
    • You can pour the solution of soda into the drain. It does not damage the pipes. In fact, it can even clean out all clogs!
  3. Use the squeeze bottles to apply the dye to the front of the disc. Use whatever pattern you like. Most people prefer to use 1 color per section. Some people like to apply the colors randomly with multiple colors per section. Make sure you stick the nozzle in the folds and folds; otherwise the dye will not penetrate. [11]
    • Each space between two rubber bands is counted as 1 section.
    • Work on top of a surface that can get dirty or stained. An old baking sheet covered with plastic wrap would work great.
  4. Turn the disc over and apply the dye on the other side. Use the same colors and patterns as you did on the front, or change them for a more unique design. When you're done, pour the rest of the dye into the drain. [12]
    • You may be able to save the dye for later. However, each brand is different, so read the label to find out if you can store it for later use.

[ Edit ] Setting and rinsing the color

  1. Place shirt in a plastic bag for 24 hours. Use a resealable bag, such as a Ziploc bag. If you can only get a regular plastic bag, tie it instead. Leave the shirt in the bag for 24 hours so that the dye can be set. [13]
    • Do not release the sweater before putting it in the bag.
    • Place the bag on top of a tray or a larger plastic bag in case the dye leaks. This protects your work surface from stains.
  2. Remove the shirt from the bag with gloves in your hands. Put the plastic gloves back on your hands and then take the shirt out of the bag. Do not remove rubber bands; leave them on. [14]
    • If you remove the rubber bands now, you risk getting color on the white areas of the sweater and destroying the tie color effect.

    [19659009] Rinse the shirt with cold water until the water runs clear. The length of time you rinse the shirt depends on the brand and color you used. Some will take much longer to rinse than others. Keep the gloves on for this step as the dye can still dye your hands. [15]

  3. Remove the rubber bands and then rinse the shirt again. If you can't pull the rubber bands, cut them instead. Shake off the shirt so that it is smooth and then rinse it again to get the rest of the dye out. Be sure to use cold water, not hot. [16]
    • Remember to wear your plastic gloves so you don't get paint on your hands!
    • You have to rinse the shirt twice because some of the dye was trapped in the spiral.
  4. Wash the sweater in the washing machine. There is still some dye left in the sweater, so it is best to wash it separately from the rest of the laundry. If this is not possible, add a color setting solution (eg Synthrapol) to the laundry. This prevents the dye from staining the rest of the laundry. [17]
    • Wash shirt with similar colors. You can also wash it with black clothes; the dye will not show up on it.
    • Hold on to a "cool" or "cold" water setting. It is safe for all fabrics and will not bleach the dye.
  5. Let the shirt dry. Hang the shirt in the sun or use a hair dryer. The heat from the dryer would actually help to put the dye into the fabric better, but be aware that it may also cause the shirt to shrink a bit!
      Spiral Tie Dye Step 19 Version 2.jpg
    • When the sweater is dry, it's ready to wear!
    • If you use a cloth dryer, you can wipe the shirt with other items. The color should not be transferred to other garments.

[ Edit ] Tips

  • Wash the shirt separately from the rest of the laundry for the first 3 or 4 washes to minimize bleeding. Alternatively wash it with similar or black colors.
  • If you cannot get a white shirt, you can consider using the reverse tie dye technique with bleach and a colored shirt.

[ Edit ] [19659076] Warnings

  • Do not use measuring cups and agitators for food or cooking. Washing alone does not remove the impurities from the dye and soda.

[ Edit ] Things You Need

  • 100% cotton white T-shirt
  • Rubber band
  • Bucket
  • Soda ash
  • Fiber reactive dyes
  • Plastic pressing bottles
  • Water
  • Fork
  • Plastic gloves
  • Dust mask
  • Old clothes or apron
  • Plastic resealable bags
  • Plastic cloth or newspaper

[ Edit ] References

  1. [1945 http://diy4tiedye.com/tie-dye-patterns-spiral/
  2. http: // diy4tiedye.com/tie-dye-patterns-spiral/strong19659097vard↑ http://diy4tiedye.com/tie-dye-patterns-spiral/
  3. https://www.thesprucecraft. com / spiral-tie-dye-t-shirt-1254208
  4. http://diy4tiedye.com/how-to-tie-dye/
  5. [1945 http://diy4tiedye.com / how-to-tie-dye /
  6. [1945 http://diy4tiedye.com/how-to-tie-dye/
  7. http://diy4tiedye.com/how-to -tie-dye /
  8. http://diy4tiedye.com/tie-dye-patterns-spiral/
  9. http://diy4tiedye.com/tie-dye-patterns-spiral /
  10. http://diy4tiedye.com/tie-dye-patterns-spiral/
  11. http://diy4tiedye.com/tie-dye-patterns-spiral/
  12. http://diy4tiedye.com/tie-dye-patterns-spiral/
  13. http://diy4tiedye.com/tie-dye-pattern-spiral /
  14. http://diy4tiedye.com/tie-dye-patterns-spiral/
  15. http://diy4tiedye.com/tie-dye-patterns-spiral/
  16. http: // diy4tiedye.com/tie-dye-patterns-spiral/

Source link