Home / How To / How to show embroidery

How to show embroidery

Embroidery ribbon art involves a lot of effort and creativity, so you should show your hard work! Unlike other types of creative hobbies, hand embroidery patterns are easy to display in their frames and do not need much bells and whistles, such as glass, to be admired. Before you can display the hoop, you must first “finish” the embroidery or put all the extra fabric in the hoop so that your project looks really polished and nice. Once you have done this, you have a variety of viewing options to choose from!


[[[[Edit]Finish the arch

  1. Lay the project down on your work surface. Find a clean, flat area where you can finish your embroidery project. Turn your project so that the actual embroidery is facing down while the back of the wooden embroidery frame is facing up.[1]
    View the embroidery frame step 1.jpg
  2. Sew a loose seam along the outside of the hoop. Thread a needle with a length of embroidery thread. Focus on excess fabric, weaving the thread in and out of the fabric to create a line of loose stitches that go around the hoop. At the beginning and end of the sewn loop, you have two extra “tails” that hang at the bottom of your embroidery project.[2]
    View the embroidery frame step 2.jpg
    • This seam should look like a large circle.
    • You do not need to make any nice seams for this – very simple stitches are enough.
  3. Cut the extra fabric from the wooden frame so that it only remains. Cut off excess fabric around your bow and leave approximately a margin of fabric outside the seam. Throw out the remaining fabric that you have trimmed away from the hoop.[3]
    View the embroidery frame step 3.jpg
  4. Pull on the loose thread tails to pull the sewn fabric in the hoop. Grasp both sections of the remaining wire that protrude along the bottom of the hoop. Pull them on firmly, causing the remaining fabric to tighten and pull into the hoop itself. Continue pulling on these threads until the fabric can no longer tighten.[4]
    View the embroidery frame step 4.jpg
    • The fabric looks messy when pulled into the hoop.
  5. Tie the loose threads together in a single knot to secure the fabric. Tie the remaining tails that you just used to pull in the extra fabric. Once they are tied, leave them in the middle of the embroidery hoop.[5]
    View the embroidery frame step 5.jpg
  6. Trace and cut out a round piece of cloth to cover the back. Place a piece of wool or felt on top of the embroidery hoop. Trace along the circular edge with a cloth marker and cut out the circle.[6]
    View the embroidery frame step 6.jpg
    • You will use this to “back up” your embroidery frame, so it is ready to be displayed.
  7. Glue down the trimmed fabric so that it stays in place. Place a few dots of hot glue under the fabric flanges so that they remain behind the embroidery hoop. Wait a few seconds for the glue to dry before moving your frame anywhere.[7]
    View the embroidery frame step 7.jpg
  8. Attach the felt circle to the back with glue. Drizzle a ring of hot glue along the perimeter of your fabric circle. Lightly press this blanket on the back of the hoop, which covers the remaining fabric. Give the glue a few seconds to dry completely before showing the frame.[8]
    View the embroidery frame step 8.jpg
    • You can also sew this circle on the back of your ring, but it may take a little longer.

[[[[Edit]Hanging wall displays

  1. Attach a hanging loop near the screw on top of the frame. Drape a string loop along the top screw on your embroidery frame. Hang this loop over any type of nail or wall hook so you can show your embroidery wherever you want. To hide the screw and hinge loop, glue a nice bow on top of the hoop as an extra decoration.[9]
    View the embroidery frame step 9.jpg
  2. Try using mounting blocks for a nail-free solution. Grab a package of mounting blocks or small boxes with a sticky glue that goes directly on your wall. Stick two mounting blocks on top of each other to create a really thick “hook”, then drape the top of the frame over the mounting block.[10]
    View the embroidery frame step 10.jpg
    • This works best if your bow does not have a fabric base on it.
  3. Hang the embroidery frame in a custom frame. Search online for special frames designed specifically for embroidery ribbons or other related products. Arrange and secure your frame in this frame before placing it on the wall.[11]
    View the embroidery frame step 11.jpg
    • These types of frames are quite inexpensive. You can find them on various craft websites, such as Etsy.
  4. View your embroideries in a group on a gallery wall. If you create many embroidery designs, it may be worth showing them together in a group! Look for an area in your home where you have a lot of open wall space and show your arches there! You do not need to have any special designs or patterns in mind when you hang them – all your frames create a really fresh, eclectic look.[12]
    View the embroidery frame step 12.jpg

[[[[Edit]Creative display options

  1. Place your bow on a shelf as a simple decoration. Embroidery ribbons have a lot of structure on their own and do not need a lot of bells and whistles to be displayed. Look for any open spaces in a bookshelf, cabin or mantle and see if you can support your arch up there.[13]
    View the embroidery frame step 13.jpg
    • For example, you can set up an embroidery frame on a piece of furniture in your dining room as a simple decoration.
  2. Drape the frame over a door handle. Attach a hanging loop or other type of stick to the top screw on your embroidery hoop. Place this frame over your door handle so you can hold it on display in a subtle, creative way.[14]
    View the embroidery frame step 14.jpg
  3. Place your bow on a small craft easel as a cute display option. Visit your local craft store and pick up a small, decorative wooden easel. Store this easel on a shelf or other piece of furniture where it can be clearly displayed.[15]
    View the embroidery frame step 15.jpg
  4. Show your little bows as Christmas tree ornaments. If you made an embroidery design on a small ring, remember to reuse it as a Christmas ornament! Attach an ornamental hanger to the upper screw along the embroidery hoop and then dangle it from a tree branch.[16]
    View the embroidery frame step 16.jpg
    • You can always cater to your future embroidery designs for a holiday theme if you plan to do so.

[[[[Edit]Things you need

[[[[Edit]Finish the arch

  • Embroidery thread
  • Needle
  • Cloth scissors
  • Lim pistol
  • Hot limps

[[[[Edit]Different display options

  • Arc (optional)
  • Hanging loop (optional)
  • Mounting windows (optional)
  • Custom frame (optional)


  • Spruce up the side of your bow with some fun ribbons or other small decorations![17]


  1. https://m.youtube.com/watch?v=CpY98M0Ogz4&t=0m12s
  2. https://m.youtube.com/watch?v=CpY98M0Ogz4&t=0m20s
  3. https://m.youtube.com/watch?v=CpY98M0Ogz4&t=1m20s
  4. https://m.youtube.com/watch?v=CpY98M0Ogz4&t=1m54s
  5. https://m.youtube.com/watch?v=CpY98M0Ogz4&t=2m3s
  6. https://www.mollyandmama.com.au/how-to-finish-an-embroidery-hoop-for-wall-hanging/
  7. https://www.mollyandmama.com.au/how-to-finish-an-embroidery-hoop-for-wall-hanging/
  8. https://www.mollyandmama.com.au/how-to-finish-an-embroidery-hoop-for-wall-hanging/
  9. https://www.mollyandmama.com.au/how-to-finish-an-embroidery-hoop-for-wall-hanging/
  10. https: //www.merriweatherc Councilblog.com/hanging-hoops-without-wall-damage/
  11. https://www.needlenthread.com/2018/09/display-your-embroidery-with-decorative-hoop-frames.html
  12. https://randomactsofamy.com/2015/11/12/11-ways-to-display-embroidery-hoops/
  13. https://randomactsofamy.com/2015/11/12/11-ways-to-display-embroidery-hoops/
  14. https://randomactsofamy.com/2015/11/12/11-ways-to-display-embroidery-hoops/
  15. https://randomactsofamy.com/2015/11/12/11-ways-to-display-embroidery-hoops/
  16. https://randomactsofamy.com/2015/11/12/11-ways-to-display-embroidery-hoops/
  17. https://www.mollyandmama.com.au/how-to-finish-an-embroidery-hoop-for-wall-hanging/

Source link