Home / How To / How to set up shelves

How to set up shelves

Mounted shelves free up space by allowing you to store and display objects along the walls of the house. They can also make a lovely addition to the room's décor on their own. Since the shelves are designed to carry weight, it is important that they are installed correctly. By taking the time to find your wall sticks and securely attach your shelves to support brackets, you can ensure that they last up to many years of use.

[ Edit ] Step

[ Edit ] Find your wall screws

  1. Select an open space along the wall to place your shelves. The exact position of your shelves is usually a matter of preference. However, there are a few important factors to consider when choosing a mounting location, such as proximity to the nearest wall bars and the size of your shelves in relation to nearby objects. [1]
      Set up shelves Step 1 version 2 .jpg
    • If the shelves you have chosen are particularly deep, for example, it may not be a good idea to mount them near doors or high traffic areas where someone may encounter them.
    • A good rule of thumb is to mount screen shelves around eye level (in most cases) to allow easy access and make them a point of contact in the room. [2]
    • If you go To stack several shelves, it is best to do so in an area where you have enough space to accommodate them around each other.
  2. Use a double finder to find the two wall bars closest to your chosen location. Turn on your stud finder and hold it flat against the wall to the left of where you want to put your shelves. Once in place, press the button on the thumb to activate it and slowly start to slide the tool to the right. When it blinks or beeps, it means a double under has been detected. [3]
      Set up shelves Step 2 version 2.jpg
    • You can get a basic stud finder at your local hardware store or home improvement center for about $ 30. More advanced models with multiple modes and precision features can get you closer to $ 60-70. [4]
    • The term "stud" refers to one of the vertical boards which includes the inner structure of the wall. It is important to locate the taps of your wall when installing shelves, as plaster is not supposed to support much weight and can collapse in time under stress.
  3. Perform a crane test to find your pins if you do not have a stud finder. In most homes, wall bolts are separated. One thing you can do to track a pin without a tool is to simply measure this distance outward from an adjacent door frame, then push along the wall in a radius with your knock until you hear a difference. [5]
      Set up shelves Step 3 version 2 .jpg
    • A pin will make a dull thump when struck, unlike the hollow plaster wall, which tends to produce a higher, deeper sound.
    • Light switches and electrical outlets are almost always mounted on a wall screw. If you are not lucky enough to find a pin, try measuring from a nearby switch or outlet, then press the surrounding area until you get a hit.
  4. Mark the location of the pins with a pencil. Once you have successfully identified your bounce or bounce, place a small dot or "X" on each site. The marks you make will act as a visual guide for when you start drilling. They will also serve as a good reminder so you don't have to chase after the studs again if you happen to find them. [6]
      Set up shelves Step 4 Version 2.jpg
    • Just make your stud marks in pen and avoid carrying so hard that you have trouble deleting them later.
    • If you do not want to draw directly on the wall, press a strip of paint tape against the wall and mark the tape instead. [19659023] [ Edit ] Positioning your shelves
      1. Hold up one of your shelf mounting brackets at the desired height. Eye rack the location of the console to see how it looks and adjust it by moving it higher or lower if needed. Again, where you place your shelves is largely up to you, as long as you stay between the pins. [8]
          Set up shelves Step 5 Version 2.jpg
        • The brackets are the supporting frame parts that are actually attached to the wall. Once mounted, they will shelf the shelves from below and stagger against the wall bars at an angle.
        • Most shelf brackets are mounted somewhere between the chest and eye height, but you can also hang the shelves higher or lower depending on the specific use you have in mind for them.
      2. Select the position of your console screw hole on the wall. Make sure the screw holes are in line with the pins. When you are satisfied with the placement of your first bracket, insert the tip of your pencil into the screw hole on the back and scribble a dot on the wall. You will use this mark as a reference point to drill your first pilot hole and to set up your second hole. [9]
          Set up shelves Step 6 Version 2.jpg
        • If your shelf brackets have more than one screw hole, go ahead and mark them for greater precision as well. [10]
        • For stacked shelves, mark all your pilot holes vertically along the same knob at the same time, making sure they are at regular intervals.
      3. Draw a line from your first pilot hole mark to the opposite pin. Hold a carpenter's level horizontally next to your first pencil and take a moment to make sure it is centered. Run your pen at the top of the level until you reach the mark you made to indicate the position of your other stud. This line will correspond to the top of the shelf. [11]
          Set up shelves Step 7 version 2.jpg
        • Stop and reset the level when you exit the room. Remember to check its alignment to make sure your line is straight and uniform.
        • Repeat this step at a different height for each set of shelves you plan to install.
      4. Make another mark where other pilot holes will go. You have now clearly marked where you need to drill each pilot hole for your shelf bracket and connect the two points with a straight line that helps you ensure that your shelves are level. At this point you are ready to start drilling.
          Set up shelves Step 8 version 2.jpg

      [ Edit ] Install the shelves

      1. Drill the pilot holes for the fastening screws. Center the tip of each screw with the corresponding pilot hole mark. Use a power drill or screwdriver to drive the screws into the underlying wall screw to a depth of about. Then carefully remove the screws from the wall. [12]
          Set up shelves Step 9 Version 2.jpg
        • Use the screws that came with your shelf brackets. If your brackets did not include their own brackets, wooden screws will be a good fit for most medium-sized shelves. [13]
        • Boring pilot holes are lighter, better looking and more accurate than trying to screw directly into the mounting holes in a shot.
      2. Attach the brackets to the wall using the pilot holes you have just drilled. Align the screw holes on each bracket with the pilot and replace the screws again. Tighten the screws with your drill or screwdriver until they are snug in the wall. Be sure to double check that your consoles are straight and even before you shoot them down. [14]
          Set up shelves Step 10 version 2.jpg
        • Avoid tightening your screws too hard. Doing so may damage the surrounding surface and weaken their connection as a result.
        • Keep setting up your shelves until you have all your brackets in place. If any of the brackets are misaligned, it will be much easier to fix them if you have not already installed the shelves.
      3. Place your shelves in place on top of the brackets. Depending on the style of your shelves, you may simply rest them on top of the consoles and call it a day. If your shelves are designed to be anchored to the brackets, insert the screws into the appropriate grooves and secure them. Most of the time these tracks will be along the tops of the brackets where the shelves are located. [15]
          Set up shelves Step 11 Version 2.jpg
        • Use your level to make sure your shelves are level. If they are level with more than a small amount, it may be necessary to drill a new pilot hole for one of your brackets.
        • As long as the brackets are securely mounted in the wall bars and you are using anchors With a suitable strength, your shelves should have no problem supporting the weight specified in the product specifications. [16]
      4. Delete any visible pencil marks on the wall. Inspect the area around your newly fitted shelves to track the markings you made when searching for your wall bolts and positioning your shelf brackets. If you find something, rub it gently with the end of the eraser. Afterwards, congratulate yourself on a job well done! [17]
          Set up shelves Step 12.jpg
        • If you chose to set up paint tape to protect your wall, simply peel it off and throw it in the trash.

      [ Edit ] Tips

      • The only time you don't have to find sticks is when the shelves you want to hang are particularly small or lightweight. In this case, it is possible to mount them directly on any part of the wall with plaster anchors. [18]
      • It is possible to mount shelves in brick, concrete, stone and stucco as well – just mount your drill with a murbite and make sure to keep it at a 90-degree angle to the wall.

      [ Edit ] Warnings

      • Avoid putting more weight on your shelves than recommended for the size, material and type of mounting tools you are working with.

      [ Edit ] Things You Need

      [ Edit ] Finding Your Wall Studs

      • Stud finder
      • Pencil
      • Measuring tape (optional)
      • Measuring tape (optional)

      [ Edit ] Positioning Your Shelves

      • Shelf brackets
      • Carpenter's level
      • Pencil
      • Measuring tape (optional) [19659070] [ Edit ] Installation of the shelves [1 9659067] Power drill
      • Shelf brackets
      • Screws
      • Carpenter level
      • Eraser
      • Screwdriver (optional)

      Edit ] References

      [[1945907] Edit ] Quick Overview

      1. [1945 https://www.bobvila.com/articles/how-to-hang-shelves/
      2. [1945 https://www.diyinspired.com/right-height-hang-shelves/strong19659091strong↑ https://www.youtube.com/watch?v=zLiAUFUenHk&feature=youtu.be&t= 2 6
      3. [1945 https: //www.businessinsider.com/best-stud-finder
      4. https://www.stylemepretty.com/living/2012/12/01/how- to-find-a-wall-stud-without a stud-finder /
      5. https://www.bobvila.com/articles/how-to-use-a-stud-finder/
      6. [1945 https://www.familyhandyman.com/woodworking/shelves/how-to-hang-shelves/view-all/strong19659096vard↑ https://www.homedepot.com/c/ah/how -to-hang- shelves / 9ba683603be9fa5395fab90a500e3e8
      7. https://www.bobvila.com/articles/how-to-install-floating-shelves/
      8. https: // www. homedepot.com/c/ah/how-to-hang- hyllor / 9ba683603be9fa5395fab90a500e3e8
      9. https://www.familyhandyman.com/woodworking/shelves/how-to-hang-shelves/view-all/
      10. [1945 https: //www.bobvila .com / articles / how-to-hang-shelves /
      11. https://www.popularmechanics.com/home/interior-projects/ g15857034 / how-to-his g-things-on-the-wall /
      12. https://www.homedepot.com/c/ah/how-to-hang-shelves/9ba683603be9fa5395fab90a500e3e8
      13. https: / /www.bobvila.com/articles / how-to-hang-shelves /
      14. https://www.bobvila.com/articles/how-to-install-floating-shelves/
      15. https: // www .homedepot.com / c / ah / how-to-hang-shelves / 9ba683603be9fa5395fab90a500e3e8
      16. [1945 https://www.popularmechanics.com/home/interior-projects/g15857034 / how-to-hang-things-on-the-wall /

Source link