Home / How To / How to remove stickers from a bicycle

How to remove stickers from a bicycle



Stickers and decals are pretty standard for many bikes and motorcycles, but they can become a moment after a while. Some stickers may be a little more stubborn than others, but you can remove some glue from your bike with some common household materials and some elbow grease. Set aside a few minutes to clean your bike so that it is completely clean before your next ride!

[[[[Edit]Step

[[[[Edit]Remove the sticker

  1. Spray over the sticker with glue remover or lubricant. Sprinkle the entire surface of the sticker or decal so that it is a little easier to scale up. If you do not have a glue remover on hand, feel free to use something like WD-40, a common lubricant.[1]
    Take stickers from a bike Step 1.jpg
    • You can find glue removers in most stores that sell cleaning supplies.
    • If your adhesive remover is not in a spray bottle, feel free to pour it into a spray bottle to make it easier to apply.
    • Check the safety instructions on the spray before spreading anything on your bike.
  2. Heat the surface of the sticker with a hair dryer for at least 5 seconds. Connect a hair dryer near your bike and set the unit on low or high heat. Keep the end of the hair dryer at least away from the surface of the bike, which may cause the adhesive from the sticker to begin to melt. Hold the mouse pointer over the sticker for at least 5 seconds – if you are dealing with a large sticker or decal, you may need to apply heat for a few more seconds. seconds.[2]
    • If you work in a garage or outdoor area, you may need to use an extension cord to warm up your bike.
  3. Peel off stickers when warm to the touch. Squeeze the corner of the sticker with 2 fingers. Lightly pull in this corner and pull it up and away from the surface of the bike. Keep in mind that some stickers can come off easily, while others may need a little more elbow grease – it depends on the size and manufacturer of the sticker.[3]
    • For example, a large sticker will probably be harder to remove than a regular, small sticker.
  4. Heat the sticker if you have problems peeling it off. Turn on your hair dryer again and hover it at least above the sticker or decal in question. Heat the sticker for at least another 5 seconds and then try peeling it again. Continue peeling off the sticker until it is completely removed from the bike.[4]
    • You may need to warm up your sticker a couple of times, which is perfectly normal!

[[[[Edit]Clean the surface

  1. Touch the surface of the bike to see if it is still sticky. Tap your finger along the part of the bike where the sticker used to be. Once you have touched the surface, determine if the metal feels sticky or smooth. If the surface is still sticky, you want to clean it before you start cycling again.[5]
    Take stickers from a bike Step 5.jpg
    • Depending on the sticker, there may be a lot of adhesive residue.
  2. Soak a surface with a lighter liquid or glue remover. Spray a lot of lighter liquid or glue remover with blueberries on the surface of an old cloth. Keep in mind that lighter fluid is less hard than some glue removers, so you do not have to worry about the surface being damaged at all.[6]
    • All old rags can work for this or a paper towel.
    • Always work with lighter fluid in a well-ventilated area, away from heat sources.[7]
  3. Scrub off debris from the bike. Rub over the entire part of the bike where the sticker used to be with the cloth. Continue rubbing over the surface until it is completely smooth to the touch. If necessary, wipe the metal dry with a clean cloth or paper towel.[8]

[[[[Edit]tip

  • You can use a heat gun instead of a hair dryer, but hair dryers do not pose a risk of damage to the paint.[9]
  • If you have a lot of trouble peeling off the sticker, you can gently use a credit card or other plastic tool to pry off the sticker.[10]

[[[[Edit]warnings

  • Avoid scraping off the sticker with a sharp object, as this can really damage the finish.[11]
  • Do not use an open flame to heat your sticker, otherwise you may risk burning yourself.[12]

[[[[Edit]Things you need

  • Glue remover or lubricant
  • Hair dryer
  • Cloth
  • Lighter liquid or glue remover

[[[[Edit]references

  1. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  2. https://m.youtube.com/watch?v=A4u7H2dn4P4&t=1m14s
  3. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  4. https://m.youtube.com/watch?v=iY1iCPCSmH0&t=0m34s
  5. https://m.youtube.com/watch?v=iY1iCPCSmH0&t=1m3s
  6. https://m.youtube.com/watch?v=iY1iCPCSmH0&t=1m40s
  7. http://doryventures.scene7.com/is/content/DoryVentures/Ronson/Website/Servicing/2018MSDSRonsonol.pdf
  8. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  9. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  10. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  11. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/
  12. https://www.motorcyclecruiser.com/how-to-safely-remove-stickers-from-motorcycles-paint/

Source link