Home / How To / How to preserve roses in resin

How to preserve roses in resin



Instead of throwing away the beautiful bow bouquet, use them to create a keepsake that you can enjoy for a long time to come. By preserving roses in resin, you can make paper weights, decorative accents or personalized gifts to give to others. It is best to use dried roses so that their color stays alive, and it takes about 5-10 days to dry them by hanging upside down. Once you have dried the roses, you should be able to complete the project from start to finish within 4-5 hours.

[ Edit ] Step

[ Edit ] Dry the roses

  1. Choose roses on top of their blooms for the most vibrant color. Avoid picking roses that have not yet opened or that are already starting to brown or drip. You can either buy roses from a store or cut them from a rose bush. [1]
      Preserving Roses in Resin Step 1.jpg
    • If you are cutting your own from a rose bush, it is a good idea to wear garden gloves to protect your skin from thorns.
  2. Remove the majority of the leaves from the stems of the roses. Either pull the leaves by hand or use scissors to cut them where they cut each other with the stem. You can also shave off the thorns if you are worried about being pricked by them. [2]
    • If you leave some leaves in place, you have the chance to integrate them into your design if you wish. They can add a nice pop of color to the rose.
  3. Wrap a piece of yarn around the stem of each rose and tie it in a bow. Use a piece of yarn and wrap it around 3-4 times before tying the bow. Make the bow as tight as possible so that the rose bunch does not come off when hung. [3]
    • If you don't have yarn, a rubber band works just as well. Just swirl it several times until it is tight against the stems.
  4. Hang the roses up and down in a dry and airy place. Keep them away from sunlight so that their color does not fade. Put them in a wardrobe or cupboard where there is not much moisture in the air and simply hang them from a hook or nail. [4]
      Preserving Roses in Resin Step 4.jpg
    • Excessive moisture can keep the roses from drying and can even cause them to grow mold.
  5. Check the roses every 5-10 days to see if they are dry by touch. Roses do not take too long to dry, so you should be ready to move on with your project within 1-2 weeks. When you touch the roses they should feel crispy and the petals should no longer be soft or pliable. [5]
      Preserve roses in resin Step 5.jpg
  6. Cut the stem away from the bud's bud after they have dried completely. When you are ready to start preserving the process, cut away the stem. If you want to use any of the leaves, cut them and set them aside with the hooks.
    • The trunk would probably just get in the way and be too long to fit properly in shape. [19659009] Use a convection oven to dry roses in 3-4 hours. Place the roses on a clean baking sheet and preheat the oven. Place the baking sheet in the lowest position and leave the roses in the oven for 2-3 hours. Check them after that time and add another hour if they are not dry yet. [6]
        Preserve roses in resin step 7.jpg
      • A normal oven may not go as low as and often have more moisture than a convection oven. You can still try this method with a normal oven, but be aware that you may not get the same results.
    • Dry roses of 1-2 days with desiccant in the microwave oven. Bury roses in a microwave safe container filled with desiccant. Microwave the container together with a mug full of water for 2 minutes. Go through the desiccant with a toothpick to check the roses and continue running them at one minute intervals until they are completely dry. Carefully remove the container and let it sit for 24 hours before removing the roses. [7]
      • A desiccant is any substance that can be used as a desiccant. There are several options you can use, but silica gel is the fastest. You can buy it in most garden supply stores.

[ Edit ] Prepare the resin

  1. Use clear polyester casting resin for the cheapest option. This type of resin will dry clear so you can see the rose inside really well. It also dries a little slower than the epoxy resin, which means you have a little more time to arrange the rose and make your craft perfect. [8]
      Preserve Roses in Resin Step 9.jpg
    • You can find this product in most craft stores or you can order it online.
  2. Select an epoxy resin if you want an amber cast to finish. Epoxy resins are usually a little faster drying and last longer than polyester resins, although both alternatives should create memorials that will last for several years. If you like the idea of ​​a slightly toned finish, the epoxy resin is the way to go. [9]
      Preserve Roses in Resin Step 10.jpg
    • You can also buy clear epoxy resins, but the cost is much higher than you would pay for a clear polyester resin.
  3. Work in a well-ventilated area to combat the strong odor of the resin. When your roses are dry and you are ready to complete your project, set your tools outdoors if possible. If you have to work inside, open as many windows as you can and use a fan to circulate the air faster. [10]
      Preserve roses in resin step 11.jpg
    • If you are sensitive to strong odors, consider wearing a face mask while you work.
  4. Use rubber gloves to protect your hands from the resin. If you happen to get resin on your fingers, simply rinsing them with water will not completely dissolve and the resin will leave a sticky residue. Remove the resin safely without using harmful chemical products by doing the following: [11]
      Preserving roses in the resin Step 12.jpg
    • Mix 1/2 tablespoon (4.5 grams) of poppy seeds with dish soap. Rub the mixture in your hands for 60 seconds without adding water. Then add water, wash your hands and scrub off the remaining resin. Poppy seeds act as an exfoliant to rough up the resin and get it off your skin.
    • If you do not have poppy seeds, coffee grounds would also work.
  5. Measure how much resin your mold will hold. Your form may have the information printed on it, but if not you can find out for yourself. Simply pour water into the mold and then pour that water into your measuring cup to see how much liquid there is. [12]
    • You can buy molds in most craft stores or online.
    • Plastic molds work well, but you can also invest in latex-rubber molds, which are more flexible and easier to remove when the resin is set. depth}}.
  6. Pour enough resin into the disposable measuring cup to fill the mold. You can buy disposable measuring cups online, in craft stores or in most local grocery stores. Look for ones that contain measurements on the page so that it is easy to pour the right amount of resin. [13]
    • Because the resin is so hard to clean, disposable measuring cups guarantee you won Do not accidentally destroy your normal measuring cups.
  7. Add the catalyst to the resin according to the instructions on the resin container. In general, the catalyst makes up 1-2% of the total volume of the resin, so if your mold holds, you would need to add about 16 drops of resin. The resin container should have a chart on the back that gives you a breakdown of how much to use. [14]
    • The catalyst heats the resin and helps it to cure or cure. Without it, your mold would never harden into a beautiful keepsake.
  8. Stir the resin and catalyst with a wooden skewer for 60 seconds. If you do not have a wooden skewer, use something else that is also disposable, such as a plastic spoon or popsicle stick. It is important that you mix things up so that the catalyst is activated. [15]
      Preserve Roses in Resin Step 16.jpg

[ Edit ] Create Mold

  1. Pour the stirred resin into the Mold. After stirring the catalyst and resin for 60 seconds, gently pour the mixture into the shape you have chosen for your roses. Be careful not to drop the resin on your work surface or get it on the mold edges themselves. [16]
    • If you are worried about spills, put an old newspaper under your workstation
  2. Place the rose in the resin in the design you want. Depending on the type of shape you chose, you were aware of which page should be the top. For example, if you use a dome shape, you want to insert the rose into the resin face up so that it becomes visible when it is straight up. Use wood skewers to squeeze the rose in place. [17]
    • The rose is likely to rise to the resin and that's okay. Right now, focus on getting it into a general placement. You will have a chance to push it deeper in a little while.
    • It's also time to add the dried leaves if you saved something. You can also add other dried flowers.
  3. Set a timer for 10 minutes and set the resin to a gel-like texture. If the resin is still liquid-like after 10 minutes, set the timer for another 10 minutes. You want the resin to be flexible so you can push the rose further without it reappearing but not so hard that you can't make any adjustments. [18]
      Preserve Roses in Resin Step 19.jpg
    • If you "work indoors or in a humid climate, it may take close to 30 minutes for the resin to get the right texture.
  4. Finish positioning when the resin has the right texture. Use your wooden skewer to push the rose deeper into the resin. If it hovered away to the side, you can also push it back in place. Use this time to arrange other flowers or leaves that are in the mold. [19]
    • It is very difficult to make roses look bad, although things are a bit central, the end result still looks beautiful.
  5. Let the resin set for about 4 hours or until it is completely cured. the back of the resin container to see how long they recommend for the curing process. It usually takes several hours, but if you made a really large or deep mold it may take longer. [20]
      Preserve roses in resin step 21.jpg [19659062] If the resin is still sticky on touch, it is not done. When completely dry, it should be smooth and hard. </li>
</ul>
</li>
<li>  Remove mold from the resin to reveal your creation! Release the mold from around the resin to scoop it out, or remove the mold if you used a flexible one. Use your mold as a decorative accent around your home, like paper failure or give it away as a gift. <sup id=[21]
      Preserve Roses in Resin Step 22.jpg
    • The molds should come off clean, which means you can reuse them to do even more!

[ Edit ] Tip

  • Place a felt bottom on the finished mold if it is on top of a hard surface that you want to protect from potential scratches. [22]

[ Edit ] Things You Need

  • Scissors
  • Twine
  • Rubber Gloves
  • Clear Polyester Casting Resin
  • Catalyst Liquid
  • Disposable Mixer Cup
  • Resin Form
  • Woodpecker
  • Dried roses
  • Paper towels

[ Edit ] References

  1. [1945 https://www.fs.fed.us/wildflowers/kids/activities /preservewildflowers.shtml Tu 1919909085 ↑↑ https://youtu.be/gVDnQOKP8kA?t=72
  2. https: // youtu. be / gVDnQOKP8kA? t = 138 [19659087] ↑ https://youtu.be/gVDnQOKP8kA?t=163
  3. https://www.fs.fed.us/wildflowers/kids/activities/preservewildflowers. shtml
  4. [1945 https://edis.ifas.ufl.edu/ep004
  5. [1945 https://edis.ifas.ufl.edu/ep004
  6. [1945 https: // youtu. be / AAr2wijpISA? t = 114
  7. [1945 http://www.sollercomposites.com/EpoxyResinChoice.html
  8. https://youtu.be/AAr2wijpISA?t=180
  9. [1945 https://youtu.be/rg04x5vvRF4?t=29
  10. https://youtu.be/AAr2wijpISA?t=150
  11. [1945 https: // youtu. be / AAr2wijpISA? t = 173
  12. [1945 https://youtu.be/AAr2wijpISA?t=196
  13. https://youtu.be/AAr2wijpISA?t=206
  14. https://youtu.be/AAr2wijpISA?t=213
  15. [1945 https://youtu.be/AAr2wijpISA?t=231
  16. https: // youtu. be / AAr2wijpISA? t = 244
  17. [1945 https://youtu.be/AAr2wijpISA?t=249
  18. [1945 https://youtu.be/AAr2wijpISA?t=318
  19. https://youtu.be/AAr2wijpISA?t=328
  20. https://youtu.be/ AAr2wijpISA? t = 308 [19659106]
    Source link