Home / How To / How to make a fashion Cape

How to make a fashion Cape

When you hear the word “cape”, you can think of a costume or a superhero. But a fashionable coat is a dynamic and versatile garment that you can throw on over any garment to make it more elegant. Instead of spending a lot of money buying one from the store, you can create your own fashion weapon in a single afternoon and customize the one you want.


[[[[Edit]Measurement and cutting of the base

  1. Measure the arm length and from the shoulder to the knee. Extend your arms straight out at your sides and measure from fingertip to fingertip to get the width of your coat with a soft measuring tape. Then stand up straight and measure from the shoulder to the knee, or wherever you want the cape to hit. If you are in between the measurements, round up a bit to give yourself more space.[1]
    Make a Fashion Cape Steg 1 version 2.jpg
    • You can measure in inches or centimeters, depending on what you prefer.
  2. Cut a rectangle of fabric with your measurements. For most people, the fabric will shop on all four sides. Use your exact width and length measurements to get an even square or a rectangle for your cape.[2]
    • You can use any type of fabric you want, but what is double-sided and resistant to fraying is the best.
    • Reusing old blankets can give you a warm flannel cape, while using silk or lace gives you an elegant, fashionable cape.
  3. Fold the fabric once lengthwise and once lengthwise. This creates a smaller rectangle so that it is easier to work with. Make sure it is even when you fold it so that it will hang evenly when you wear it.[3]
  4. Measure a mark from the folded corner to the middle. Find one of the folded corners of the fabric that has all four layers of fabric connected. Measure away from the corner that extends to the center with a ruler.[4]
    • If you think you will not be big enough for your neck or if you want to make the neck hole wider, you can add your measurement.
  5. Make 4 to 5 selections along the selection. Hold your ruler in place, move it from side to side and mark where it is on each side of your original mark. This creates a curved line with dots on your fabric.[5]
  6. Cut across your measurements with sharp scissors. Keep your fabric folded and use sharp scissors to tighten along the curved line you measured. Make sure your line is curved, not straight, so that the fabric comes out in a circle.[6]
    • Try on your coat now to see if the neck is wide enough. If not, lay out the coat again and make any adjustments you need.
  7. Round out the bottom of the fabric. Hold the fabric pleated with the neck hole facing up. Use a cloth pencil to draw a curve or semicircle from the neck hole to the lower left corner. Cut along this line to round out the bottom of the cape.[7]
    • This cut creates the circular, winding shape that most coats have.
  8. Cut down the middle of the cape if you want it to open at the front. Lay your out on the floor so that it is flat and then mark a straight line from the neck down. Use sharp scissors to cut the top layer of fabric just to make an opening for your cape.[8]
    • You do not have to cut an opening in your cape if you do not want to. Through an opening, you can attach zippers or fasteners to the front, but this also means that you may need to catch it to prevent it from coming off.

[[[[Edit]Attach a hood

  1. Trace a hood pattern that is about a long time on spare fabric. You can find free hood designs online that you can track and use as a guide. Place it on your excess fabric and either hold it in place with pins or mark it with a pencil.[9]
    • Adding a hood is completely optional, but it can elevate your coat to a nicer and more expensive garment.
  2. Fold the fabric so that it is in two layers and then cut off the hood. You will need two pieces of fabric for your hood, so make sure your fabric doubles. Then cut out your identical hood pieces and leave a seam allowance on all sides.[10]
    • A sewing allowance gives you some space if you need it while sewing. It is always better to cut your pattern a little too big rather than a little too small.
  3. Sew the two hood pieces together with a straight seam. Hold the pieces of fabric on top of each other, sew them together with a straight seam with a sewing machine or by hand. This will give the hood a nice prison to ensure it does not revel.[11]
    • If you sew by hand, you can make a straight seam by pushing the needle through both fabric layers and then pulling it back through the layers roughly from your first seam. Continue until you have reached the end of the hood.
  4. Attach the hood to the back of your cape. Spread your out on the floor so that it lies flat and then place the bottom of the hood on the back of the cape. Secure it in place with sleeping sticks so that it stays in place while you sew on it.[12]
    • You can choose which direction you want the front or back of the hood to be. Pay attention to any patterns or seams that your fabric has so that it fits correctly on the body.
  5. Sew the bottom of the hood in place with a straight seam. Hold the pins on the hood when sewing so that it does not move. Use a sewing machine or a needle and thread to sew on the hood with a straight seam.[13]

[[[[Edit]Add the finishing touch

  1. Attach prestressing tape to the raw edges of the fabric. Bias tape is an easy way to catch the edges and hide any uneven cuts. Take a roll of prestressed tape and place it around the bottom and edges of the fabric on your cape. Place the sewing pins on the tape to hold it in place.[14]
    • You can find bias tapes in most sewing shops.
  2. Sew the edge of the bias tape to your cape. Use a straight seam again and attach the prestressing tape to the edges of your coat. Keep the tape as straight as possible when sewing so that the tape does not stick together. You can sew by hand or with a machine to hold the ribbon in place and give your coat a finished look.[15]
  3. Add snaps, buttons or zippers to your coat for a finished look. If you cut an opening in the front of your cape, you can make it more versatile by adding closures on the front. Spread out your coat and statue opening so that the two pieces touch each other. Either sew buttons in a row, sew a zipper on each side of the opening, or sew snaps up and down the coat to keep it closed when you want it to be.[16]
    Make a Fashion Cape Step 16 Version 2.jpg
    • Sewing snaps are by far the easiest option to choose, and they can be easily sewn on by hand.


  • Once you have cut out your basic body, you can customize the one you want.

[[[[Edit]Things you need

  • Fabric
  • Scissor
  • Measuring tape
  • Pen
  • Ruler
  • Sewing needle and thread or sewing machine
  • Bias tape (optional)
  • Buttons, zipper or buttons (optional)


  1. https://www.cutoutandkeep.net/projects/winter-fashion-cape
  2. https://sewguide.com/cape-diy-patterns/
  3. https://sewguide.com/cape-diy-patterns/
  4. https://sewguide.com/cape-diy-patterns/
  5. https://sewguide.com/cape-diy-patterns/
  6. https://sewguide.com/cape-diy-patterns/
  7. https://www.cutoutandkeep.net/projects/winter-fashion-cape
  8. https://www.youtube.com/watch?v=8leuvGX2GeU&feature=youtu.be&t=233
  9. https://www.cutoutandkeep.net/projects/winter-fashion-cape
  10. https://www.youtube.com/watch?v=TX1RIXFli7A&feature=youtu.be&t=24
  11. https://www.youtube.com/watch?v=TX1RIXFli7A&feature=youtu.be&t=77
  12. https://www.cutoutandkeep.net/projects/winter-fashion-cape
  13. https://www.cutoutandkeep.net/projects/winter-fashion-cape
  14. https://www.youtube.com/watch?v=AwpkYrs2FYE&feature=youtu.be&t=97
  15. https://www.youtube.com/watch?v=AwpkYrs2FYE&feature=youtu.be&t=97
  16. https://www.youtube.com/watch?v=AwpkYrs2FYE&feature=youtu.be&t=1261

Source link