Home / How To / How to knit baby pants

How to knit baby pants



Homemade baby clothes create expensive heirlooms and because they are so small, you can knit them quickly! Knit 2 flat pieces of fabric in a stockinette stitch pattern and then sew them together on the sides to form the trousers. Since you make the waist with a double rib stitch, which is slightly elastic, there is no need to touch with buttons or drawstrings. This makes this project good for new to intermediate knitters.

[[[[Edit]Step

[[[[Edit]Throw on

  1. Choose a soft worsted yarn in weight yarn for baby pants. Choose a 1
    25 gram (260 oz or 260 m) yarn with worsted yarn (# 4) yarn in any color. You may see the chamber weight labeled as Afghan, mahogany or medium weight yarn. Although you can use yarn made of any material, choose yarn that is soft enough for the child and that will wash well.[1]
    Knit baby pants Step 1.jpg
    • Keep the label away from the yarn so that you remember the washing instructions when you have finished making the trousers.
  2. Make a tie knot with yarn in the comb weight. To form a sliding knot, pull the yarn and turn the end into a loop so that the end is on top. Hold the tail with one hand and slide the other index finger and thumb through the loop. Squeeze the work yarn and take it through the loop.[2]
  3. Slide the sliding knot on knitted needles in size 7 (4.5 mm). Slide the loop on a straight needle. Then pull the yarn tail so that the loop is tightened around the needle. Stop pulling just when the knot is secure so that you can easily insert your needle into the seam.[3]
    • If you accidentally pull too hard and you can not insert the needle into the seam, gently pull on the loop while holding the actual knot. This loosens the seam so you can put the needle through it.
  4. Cast on 36 stitches. Although there are several ways to sew, one of the easiest ways for beginners to knit a seam. Instead of placing the stitch you just made on your right needle, insert the tip of your left needle into the loop and slide it back onto the left needle so that you have two stitches on it. Continue to knit stitches and place them back on left needle until you have a total of 36 stitches on it.[4]
    • You also need an extra set of 7 (4.5 mm) knitting needles in the United States so you can work each leg.

[[[[Edit]To make a ribbed waist

  1. Work 13 rows with a basic 2 x 2 rib pattern to create the waist. For rib knit, knit (p) 2 stitches and knit (k) 2 stitches over the entire row. When you get to the end of the first row, turn work and p2, k2 over the next row. Make a total of 13 rows in rib stitches.[5]
  2. Make 6 rows of stockinette st. For the first row of stockinette st, work each stitch. To make the next row, pick up each stitch. Knit the following four rows by knitting the odd rows and clearing the even rows.[6]
    • You knit rows 1, 3, 5 and rows 2 and 4.
  3. Knit an increasing row by row 7. When you have made 6 garter sts, cast on 1 st and make 1 left stitch (m1L). Then, k3, m1L across the row until there are only 2 stitches left. Knit the last 2 stitches to finish the increasing row.[7]
    • You will have 48 stitches on your needles when you finish this line.
  4. Work 22 more rows in stockinette st. Purge the row after your increasing row to make row 8 in the stockinette st pattern. Continue to change rows and knit rows for another 21 rows.[8]
    Knit baby pants step 8.jpg
    • Remember to knit the odd rows and knit the even rows.

[[[[Edit]Knit the legs

  1. Purl 24 stitches and pass the remaining 24 stitches to a spare needle. To work the row where the legs are divided, turn 24 stitches. Then insert the remaining 24 stitches on a US 7 (4.5 mm) spare needle. You will continue to work the seams that you have just cleaned to make the right leg. Do not work the seams on the spare needle yet.[9]
    Knit baby pants step 9.jpg
    • You can use a spare needle or round needle, depending on what you prefer.
  2. Place a stitch marker on the first stitch on the left leg and turn your work. Attach a stitch marker to the first stitch you placed on the spare needle. This will help you remember that this is the beginning of the left leg. Turn your work so that you can knit the stitches on your needles.[10]
    • If you do not have a stitch marker, attach a safety pin or a small hair accessory to the stitch.
  3. Work stockinette st in 44 rows. Knit each stitch in the row after dividing them. Then continue working the stockinette st pattern along the entire right leg. Remember to knit the odd rows and knit the even rows.[11]
    • You will work 24 stitches over each row instead of the 48 you did for previous rows.
  4. Make 6 rows in the seed fabric pattern. To give the pants a little texture near the bottom of the leg, make 6 rows of seed stitches. K1, p1 over the entire first row with the sowing pattern. Then pl, k1 over the second row of seed stitches. Knit four more rows by changing the seams as follows:[12]
    • Odd rows: * k1, p1 *
    • Even lines: * p1, k1 *
  5. Cast off the right leg stitch. Now that you have done the right leg, cast off each seam on your work needles. You can tie them knitted or completely, but you do not need to fasten the seams with the seed fabric pattern. Then tie off the last stitch and leave a yarn tail that is about long.[13]
  6. Work left leg using stockinette stitch and milling stitches. Return to the stitch marker and work all the seams in the row. Repeat the pattern you used for the right leg. Smooth 44 rows and then make 6 rows in the seed fabric pattern. When you are done, cast off the stitches on the left leg and tie a knot to secure the last seam.[14]
    Knit baby pants step 14.jpg
    • If you placed left leg stitches on a round needle, push them back on your regular needles before starting work.
    • Leave a tail that is approximately long so that you can use it to join the bone pieces.
  7. Create an identical piece of fabric like the one you just made. When you have completed an entire piece of fabric that has two legs, repeat the steps to make an identical piece. You should sew the sides together to form the pants because you did not sew them in the round.[15]
    Knit baby pants step 15.jpg
    • Use the same yarn and needles when working the second piece so that it works the same size.

[[[[Edit]Assembly of the trousers

  1. Lay the trousers side by side and thread a tape pin. Arrange both pieces of fabric so that the right sides face up and 2 of the legs touch. Then thread a tissue needle with 1 of the long yarn tails that are at the bottom of the trouser leg.[16]
    Knit baby pants step 16.jpg
    • If you prefer, use a darning needle instead of a tissue needle.
  2. Use mattress stitches to sew the sides of the pants together. To get mattress stitch, insert the needle in the opposite seam on the fabric. Drag to connect the pieces. Then insert the needle between the seams and knit from side to side. Tighten again when you reach the end of the pieces to tighten the seams. Weave in the tail when you reach the top of the pants.[17]
    • Mattress stitch is a fantastic seam for sewing the stockinette stitch pattern because it creates an almost invisible seam.
  3. Fold the pants and mattress seam on the other side of the legs. Fold the pants so that the seams side is on the right and the upper piece of fabric on the right side up. Thread your needle again and sew the other side of the pants together. Work from the legs of the pants down to the waist. Then weave in the yarn tail.[18]
  4. Sew the inner legs together to finish the pants. Now that the pants are joined on the outside, use mattress stitches to sew the inner legs. This also forms the branch of the pants. Weave at the ends to finish the pants.[19]
    Knit baby pants step 19.jpg

[[[[Edit]tip

  • If you want to check your gauge before starting the pants, knit 28 rows with 19 stitches to get a swatch.
  • If you see part of a pattern surrounded by an asterisk[20]

, you should repeat the pattern inside. For example, if you see * k1, p1 * k2, knit 1, knit 1 until you reach the last two stitches, which you knitted.[[[[Edit]

  • Things you need
  • 2 sets of knitting needles in the USA in size 7 (4.5 mm)
  • 1 yarn (125 g / 4.5 oz or 260 m) comb weight yarn (No 4)
  • Tapestry needle
  • Stygmarkör
  • Measuring tape

Scissor[[[[Edit]

  1. references
  2. https://www.craftyarncouncil.com/standards/yarn-weight-system
  3. https://youtu.be/oj21JDDSrgM?t=53
  4. https://youtu.be/b2sQ777rFXM?t=40
  5. https://youtu.be/b2sQ777rFXM?t=42
  6. https://www.fredamossdesigns.com/rib-2×2
  7. https://youtu.be/b2sQ777rFXM?t=108
  8. https://youtu.be/b2sQ777rFXM?t=134
  9. https://youtu.be/b2sQ777rFXM?t=326
  10. https://youtu.be/b2sQ777rFXM?t=361
  11. https://youtu.be/b2sQ777rFXM?t=379
  12. https://youtu.be/b2sQ777rFXM?t=442
  13. https://youtu.be/b2sQ777rFXM?t=494
  14. https://youtu.be/b2sQ777rFXM?t=519
  15. https://youtu.be/b2sQ777rFXM?t=599
  16. https://youtu.be/b2sQ777rFXM?t=623
  17. https://youtu.be/6tMJPqFBKOE?t=76
  18. https://youtu.be/6tMJPqFBKOE?t=638
  19. https://youtu.be/6tMJPqFBKOE?t=307
  20. https://www.youtube.com/watch?v=6tMJPqFBKOE

https://knitfarious.com/how-to-read-knitting-stitch-patterns-knitters-guide/


Source link