Breaking News
Home / How To / How to do tufting

How to do tufting



Tufting is when you make an impression on your fabric with a tufting needle, screws or nails before covering them with buttons. Adding tufts to your piece of fabric is a great way to easily add style and a classic finish. All you need to add tufts are some materials such as buttons, tufting yarn or trays. With just a little time, you will have beautiful tufts in your piece of fabric.

[[[[Edit]Step

[[[[Edit]Design your project

  1. Choose your tufting pattern for your project. The two main tufting patterns are diamond and biscuit. A diamond pattern is when the tufts are in the shape of a diamond, while a biscuit pattern has tubes in a square shape. Decide which pattern will look best on your specific project, whether it is a bench, headboard or pillow.[1]
    Do Tufting Step 1.jpg
    • For example, you can design a headboard to be in a diamond pattern or a bench that has a biscuit pattern on.
  2. Add padding to your project so that the pushers work properly. Choose something like foam to create thickness and add a layer of batting over your project under the fabric for extra protection. Place the padding on top of your project and cut it if necessary so that it is exactly the same size. Lay batting over the padding with enough left to wrap around the edges of the project.[2]
    Do Tufting Step 2.jpg
    • Give your project a thick layer of padding so that the tubes can actually be created. For example, foam will create deeper tufts than will come.
    • Batting, which is soft insulation for your project, is useful if you cover a hard surface such as plywood so that the wood does not pass through the fabric.
  3. Determine the distance and row count for the pushers. Choose if you want the tufts to be spread or close together, as well as how many rows your project will have. For example, you might decide on tufts in a biscuit pattern that is apart.[3]
    Do Tufting Step 3.jpg
    • Consider planning this on paper so that you can easily erase pencils if you make a mistake or rearrange the pushes.
  4. Mark where you want the buttons on your fabric with chalk. Use a tape measure to even out the tufts on your project and mark the stains with a piece of white chalk or a white pencil. If you put buttons on both sides of your piece of fabric, mark both sides with chalk.[4]
    Do Tufting Step 4.jpg
    • If you put buttons on both sides of your fabric, it is important that they are placed in the same way on both sides for perfect touches.
  5. Buy enough buttons and other accessories to cover your project. Once you have determined how many tufts you have, buy enough supplies to create each tuft from a local hardware store. For example, if you have measured 10 tufts, you may buy 10 buttons, 10 washers and 10 nails.
    Do Tufting Step 5.jpg
    • It is a good idea to buy extra accessories just because you are moving or need an extra.
  6. Choose buttons in a different color so that your project stands out. While most tufting projects have buttons that are covered in the same fabric that was used to make the pushes for a cohesive look, you can choose a different fabric or design. Select buttons or buttons in a contrasting color so that they protrude towards the pushers.
    Do Tufting Step 6.jpg
    • For example, you can cover a headboard in light pink fabric and then use buttons that look like diamonds for a sparkling look.

[[[[Edit]Use a needle and buttons

  1. Lay tufted yarn through each button you use. Cut a piece of tufted yarn that is at least twice as long as the height of the piece of fabric you are going to pull through. Thread the piece of yarn through the loop on the back of the button and do the same for the rest of the buttons you use.[5]
    Do Tufting Step 7.jpg
    • Buy a keypad to quickly and easily cover your buttons if you want.
    • Tufting yarn is strong enough to be pulled through the fabric and can be found at a local craft or home improvement store.
    • This is the perfect way to add tufts to things like pillows where you can tough both sides.
  2. Press a button that drops the needle all the way through the fabric. Use a push button that is long enough to go through your fabric item with room to save. Place the needle tip on one of the marked spots and push the needle all the way to the other side. If you marked the other side of your fabric, try to get the needle tip to get through the marked spot on this other side as well.[6]
    Do Tufting step 8.jpg
    • For example, a tufting needle will work for most projects.
  3. Thread the ends of the yarn through the tufting needle in the same direction. Take the piece of yarn that has a button attached to it and join the two ends so that they are both directed in the same direction. Pass the two ends through the eye of the tufting needle and pull the yarn through.[7]
    Do Tufting Step 9.jpg
  4. Pull the needle through the fabric so that the button is in place. Push the needle all the way through the fabric and pull it out from the other side. This will guide the yarn through the fabric so that the two loose ends are on the other side while the button remains in place on top of the fabric.[8]
    Do Tufting Step 10.jpg
    • Be careful when pulling in the needle so that you do not sting yourself.
  5. Add the buttons on the other side of the fabric if you like. Thread another button through one end of the yarn you just pulled through the fabric. It helps to pull the yarn so that one end is longer than the other so you can easily add the button.[9]
    Do Tufting Step 11.jpg
  6. Tie a sliding knot and pull it tightly to form the tufts. When your second button is centered on the selected location, form a sliding knot around the button. Pull the shorter end of the knot to tighten the yarn. The more you tighten the yarn and button, the deeper your booms will be.[10]
    Do Tufting Step 12.jpg
    • Create a sliding knot by forming a large loop of yarn with your fingers and grabbing the yarn through the loop before pulling it hard.
    • Once you have done this with the rest of your buttons, it is easy to make sure that all are evenly tightened with the slider knot.
  7. Form a square knot when it is tight and cut yarn. To tie a square knot, place the left piece of yarn to the right and tie a knot, then place the right piece over the left piece and tie it again. This will keep the button in place and the pushers tight. Use scissors to cut the string carefully under the button so that the ends are not visible.[11]
    Do Tufting Step 13.jpg
    • Do this with the rest of the buttons when they are all connected.

[[[[Edit]Tufting with nails or screws

  1. Choose between screws and nails to form your booms. Use screws for super-secure toughs or select nails to prevent the fabric from sticking up. Each nail or screw you use needs a washer to be placed in, so make sure you have enough washers, nails or screws to create each tuft.[12]
    Do Tufting Step 14.jpg
    • Only use nails or screws to form tufts if your project is one-sided and has a stable base to which they can be attached.
    • Make sure the washers, screws and nails are small enough to fit under your button so that they are not visible.
    • You can use screws for super fast and easy tufting work.
  2. Place a nail or screw inside a washer and hold it in a marked place. Depending on which one you choose, place a nail inside a washer or a screw inside a washer. Place it on a marked area where the tuft will go, hold it with just one hand so you can use the other to push it into the fabric.[13]
    Do Tufting step 15.jpg
  3. Use a drill or hammer to press the screw or nail into the fabric. Slowly hammer in the nail or drill the screw and make sure to keep the nail or screw super straight. Continue to press the nail or screw in the fabric until it is fine and tight, according to your tufting preferences.[14]
    Do Tufting step 16.jpg
    • If you use a hammer, be careful not to hit your fingers while holding the nail in place.
  4. Cover the back of a button with a strong glue and attach it to the tuft. Use hot glue or another type of strong glue and place a large dot on the back of the button. Place the button on top of the nail or screw so that it covers it completely and press down firmly. Do this with the rest of your button tops, and your project is complete![15]
    Do Tufting Step 17.jpg
    • If your button has a loop on the back for thread, remove this with pliers before applying the glue.
    • Avoid adding so much glue that it leaks out from under the button when pressed.
    • Hold the button in place for a few seconds so that it has time to dry.

[[[[Edit]Things you need

[[[[Edit]Design your project

  • Padding
  • wadding
  • Scissor
  • Measuring tape
  • White chalk
  • Buttons
  • trays
  • Nails or screws

[[[[Edit]Use a needle

  • Tufting yarn
  • Scissor
  • Buttons

[[[[Edit]Tufting with nails or screws

  • trays
  • Nails or screws
  • Drill (optional)
  • Hammer (optional)
  • White chalk
  • Glue
  • Buttons
  • Pliers (optional)

[[[[Edit]references

  1. https://www.charlotteobserver.com/living/home-garden/article9131216.html
  2. https://www.youtube.com/watch?v=l-u0xLteizc#t=5m45s
  3. https://www.charlotteobserver.com/living/home-garden/article9131216.html
  4. https://www.youtube.com/watch?v=bXBObylr6LM#t=35s
  5. https://www.youtube.com/watch?v=bXBObylr6LM#t=1m24s
  6. https://www.youtube.com/watch?v=sVhg8mkn0aQ#t=25s
  7. https://www.youtube.com/watch?v=sVhg8mkn0aQ#t=45s
  8. https://www.youtube.com/watch?v=bXBObylr6LM#t=2m48s
  9. https://www.youtube.com/watch?v=bXBObylr6LM#t=4m2s
  10. https://www.youtube.com/watch?v=bXBObylr6LM#t=4m22s
  11. https://www.youtube.com/watch?v=sVhg8mkn0aQ#t=1m58s
  12. https://www.youtube.com/watch?v=lsk_MJZXMC0#t=6m9s
  13. https://www.youtube.com/watch?v=l-u0xLteizc#t=9m20s
  14. https://www.youtube.com/watch?v=l-u0xLteizc#t=9m30s
  15. https://www.youtube.com/watch?v=lsk_MJZXMC0#t=9m25s

Source link