Home / How To / How to crochet a potholder

How to crochet a potholder



Potholders are a perfect project if you are new to crocheting or just want to use a little of your yarn. As long as you can make a chain and a crochet hook, you should be able to create a thick square that protects you from hot pots. This double-thick potholder is processed instead of back and forth so that both layers are formed when you crochet. It is sometimes called a folded or magic potholder because it works so fast!

[[[[Edit]Step

[[[[Edit]To create a basic chain

  1. Choose cotton yarn in worsted weight. You will need a 4-ounce (1
    13 g) skein of worsted weight or # 4 yarn such as Afghan or Arangar. Look for yarn made from all cotton because acrylic yarn can melt if you put a hot pan on it.[1]
    Crochet a potholder Step 1.jpg
    • Choose a solid yarn or get multicolored yarn for a living potholder.
  2. Make a sliding knot. Pull a length of yarn and twist the end into a loop. Slide your thumb and forefinger into the loop and use them to grab the yarn tail. Hold the work yarn with the other hand so that you can pull the tail through the loop near its center or near the loop of the tail. Gently pull the work yarn to close the loop around the tail as you pull it through to create a new loop.[2]
    • If you are new to sliding knots, practice a few times. To tell if you have made a tie knot correctly, continue to pull the yarn in opposite directions. The knot should be undone instead of tightened.
  3. Slide the knot on a crocheted US G (5 mm) crochet hook. Put the knot on the crochet hook and pull on the yarn until it fits snugly around the hook. Do not pull too hard, otherwise you will have a hard time making your base chain.[3]
  4. Make 35 chain stitches to create a base chain. Take the work yarn that is attached to the skein and wrap it once around your crochet hook. Pass the hook through the loop to make a chain. Then repeat this to make a total of 35 chain stitches, which should be approximately long.[4]
    • This makes the base or bottom edge of your potholder.
    • Although gauge does not matter much for this project, you may want to crochet tighter if your chain is longer than or make looser stitches if your chain is too short.

[[[[Edit]Single hook of the potholder

  1. Make a single crochet hook (SC) in the base chain. Insert your hook into the chain stitch closest to the hook and wrap the yarn around it once. Return the hook through the chain so that you have 2 loops on the hook. Fold the yarn around the hook one more time and pull your hook through the 2 loops to create 1 crochet stitch.[5]
    • The single crochet stitch is one of the fastest crochet stitches that works, so this potholder comes together quickly.
  2. Crochet until you reach the last seam on the base. Continue to make a crochet stitch in each chain. Stop crocheting when there is only 1 chain left on the base.[6]
    • This means that you will make a total of 34 stitches on this side of the foundation chain.
  3. Make 2 crochet stitches in the last stitch to make a corner. When you are at the last chain on the foundation, make an SC seam. Then insert the hook in the same chain stitch and make a new SC stitch in it. This gives a small curve that forms the corner of your potholder.[7]
  4. Crochet each stitch on the other side of the chain. Now that you have bent the end of your foundation, you can crochet in the back loops of the chain. Make an SC stitch on the back of each stitch until you reach the other end of the row. You make 35 SC stitches along the back of the foundation chain. This completes the first full line of SC.[8]
    • It is really important that you do not join the lines and turn the work around. Remember that SC in the rear loops.
  5. Continue to SC back and forth until your potholder is square. You do not need to make extra SC stitches in the corners because you have already created them. Just remember to continue to make SC stitches in the stitches on the SC row immediately before it, rather than in the chain stitches. Depending on your tension, you need to knit around 40 rows SC with 71 stitches each. When your potholder is at least square, work to the end of the last row you want to complete.[9]
    • This makes two layers of fabric, which form the double-thick potholder.

[[[[Edit]Finish your potholder

  1. Make 7 chain stitches to form a hanging loop. When you reach the corner and your potholder is as big as you want, make 7 chain stitches. This provides a short fabric length that you use to create a loop to hang the potholder when you are not using it.[10]
  2. Attach the loop to the potholder with a sliding stitch. Hold the last loop of the chain on your hook and slide your hook into the corner of the potholder. To connect the loop to the potholder, grab the work yarn with your hook. Pull it through the loop and then pull it through the seam on the hook.[11]
    • If you do not want your potholder to have a hanging loop, just skip these steps and tie off your work yarn.
  3. Cut a yarn tail and tie off the yarn. Leave a long yarn tail that you can use to sew the top of the potholder closed. Before sewing it closed, however, take the yarn through your last seam and make a knot.[12]
    • If you forget to leave a long yarn tail, just tie a length of yarn at the end of your yarn tail and use it to sew the closure of the potholder.
  4. Thread a wallpaper needle and whisk the upper edges closed. Insert the needle through the seam closest to the hanging loop and slide it through the opposite seam on the other edge of the potholder. Pull the yarn and insert the needle through the next stitch. Keep whipping until you reach the end. Then tie off the yarn and use the hook to pull the tail into the middle of the potholder.[13]
    • If you feel more comfortable making the slip stitch, use a wallpaper needle to slide the stitch between the stitches on the edges of the potholder to join them together.

[[[[Edit]Tip

  • Creating a potholder is good crochet and they give fantastic gifts!
  • It is very important to sew a double-thick potholder instead of a layer in a layer as the extra layer protects you from being burned.

[[[[Edit]Things you need

  • 113 grams (4 ounces) of worsted yarn
  • Size US G (5 mm) crochet hook
  • Scissor
  • Tapestry or padding needle

[[[[Edit]References

  1. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  2. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  3. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  4. https://youtu.be/bVRKivE1WxA?t=74
  5. https://youtu.be/dXr679vwoa0?t=62
  6. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  7. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  8. https://youtu.be/bVRKivE1WxA?t=244
  9. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  10. https://extension.usu.edu/sewing/ou-files/crocheting.pdf
  11. https://youtu.be/Mm2FrLdF6MI?t=356
  12. https://youtu.be/Mm2FrLdF6MI?t=369
  13. https://youtu.be/Mm2FrLdF6MI?t=438

Source link