Home / How To / How to build a recording booth

How to build a recording booth

A home-made recording booth can be a good option when recording vocals or acoustic instruments. To be able to build a recording booth yourself, you need some general knowledge of carpentry and experience in basic home improvement projects. But with the right tools and knowledge you can complete the project in a week or two. Consider building a recording booth such as adding a small room to your home, with many of the same steps as framing the walls and putting up plaster. Feel free to hand out parts of the project that you do not feel comfortable managing yourself.

[ Edit ] Step

[ Edit ] Planning the Booth

  1. Select a corner of an existing room to build your recording booth in Choose a corner in a room where you want to build your recording booth so you only have to construct two walls. If possible, choose a corner with exterior walls as they are generally thicker and more sound insulated. [1]
      Build a Recording Booth Step 1.jpg
    • This is for building a rectangular recording booth from the ground up. You must have basic knowledge of carpentry including framing and plaster to build a booth. If you do not have the tools or knowledge to do it yourself, hire a contractor to build a booth for you.
    • Make sure the room you choose also has a solid floor. For example, a ground floor or a basement is a good choice. An upstairs room is not ideal as these floors are not as stable, which can be bad for recording if the floor vibrates or makes crackling sounds.
  2. Select a corner with an existing light fixture or socket if possible. Build the mount around an existing light fixture if you can provide light inside the stand without extra work to install a new fixture in the ceiling. Construct the mount in a corner with an existing wall outlet to provide additional power sources in the stand that you can connect a lamp or audio equipment to. [2]
      Build a Recording Booth Step 2.jpg
    • If you are building an existing light fixture is not an option, you can run some LED lighting strips around the ceiling and floor of the light fixture.
  3. Measure the room and find the pins in the corner walls. Use a tape measure to measure the room's length, width and height and write down the measurements. Use a double finder to locate the pins in the two walls in the corner that you plan to build the booth in and mark their positions on the wall with a pencil. [3]
      Build a recording booth Step 3.jpg
    • You can draw a rough sketch of the room and write down measurements and stud positions if it is easier for you to visualize the booth in this way.
  4. Make the booth a size that fits in the room and is in line with wall stud seats. Plan for a short wall and a longer wall, about 1.5 times the length of the short wall, to create a rectangular booth. Make the walls long enough to align with pins in existing walls to screw them into place. [4]
      Build a recording booth Step 4.jpg
    • A good standard size for a rectangular recording booth is off. However, adjust the size based on the space you have available and the locations of the studs in your walls.
    • Think about what type of recording you want to do when you are also planning the size of the booth. For example, a by-stand is best suited for solo vocalists or acoustic artists, or perhaps two-person bands. If you want to be able to record a larger band, you may want to think about converting an entire room to a recording studio rather than building a booth.

[ Edit ] Constructing the Frame

  1. Buy a door for your recording booth and note the dimensions. Choose out and buy a door before you build the frame. You use the measurements to build a rough opening for the door in 1 of the wall frames. [5]
      Build a recording booth Step 5.jpg
    • A door with a glass window at the top or even a door that is mostly glass is a good alternative for a recording booth so you can let some light into the booth and have visibility between the booth and the surrounding room.
  2. Construct the frames for the walls. Build the shorter wall and the longer wall out of pieces of timber and screw the pieces together with wooden screws and a power drill. Make the walls as high as the ceiling height of the room, which is usually about the same. [6]
      Build a recording booth Step 6.jpg
    • For example, if your recording booth will be over, build a wall that is long and 1 that is long.
    • You can either cut the wood to size yourself or have it cut for you in a home improvement center or timber yard.
  3. Build a rough opening for the door in 1 of the walls. Construct a door frame that is wider than the door width and higher than the door height. Make it out of timber as with the rest of the road frames. [7]
      Build a recording booth Step 7.jpg
    • For example, if the door is a standard by size, make the rough opening of.
    • Note that this step must be done at the same time as building the road frames.
  4. Screw the frames into studs in existing corner walls and in the floor. Set up the longer wall in place, gently line it with the pins in the wall for which you planned, and then attach it to the pins with wooden screws and a power drill. Repeat this for the shorter wall and screw together the two wall frames where they meet. Also screw the bottom of the frames into the floor. [8]
      Build a recording booth Step 8.jpg
    • Let someone help you keep the walls up and steady as you drive the screws in place.
    • If the floor of the room is a regular wooden floor, use wooden screws to secure the frame to the floor. If you build your booth somewhere like a garage or basement with a cement floor, use wall screws.
  5. Attach electrical boxes for an audio outlet and electrical outlet to the frame. Nail or screw an electrical box for the electrical outlet to a beam frame, roughly from the floor. Attach another electrical box for the audio cable jack 1 or 2 rays across. [9]
      Build a recording booth Step 9.jpg
    • Be sure to check local electrical regulations before installing electrical boxes. If you are not sure, consult a licensed electrician.
    • If you are not experienced in electrical work, it is best to get an electrician to do the actual wiring for you. You can go ahead and install the electrical boxes on the frame if you like, but having a licensed electrician complete the wiring.

[ Edit ] Insulation, plaster and painting of the walls [19659006] Stuff R-19 fiberglass insulation between the walls of the arches. Cut pieces to fit between the pins from a roll of R-19 fiberglass insulation using a tool knife. Fill in all spaces between pins with insulation. [10]

  Build a recording booth Step 10.jpg
  • Fiberglass insulation is available in rolls that are wide, the standard width between the bars, so that it fits perfectly between the pins and stay in place.
  • You can buy special sound insulation instead of standard fiberglass insulation if your budget allows. However, fiberglass insulation tends to work just as well and is much cheaper.
  • Hang dry wall inside and outside the walls. Cut pieces of plaster to fit the walls, with holes for the electric drawers, and attach them to the frames with plaster screws and an electric drill. Cover the drywall with 3 thin layers of gypsum sludge, let each layer dry for 24 hours and grind it smoothly before applying the next coating. [11]
      Build a recording booth Step 11.jpg
    • You can hire a drywall contractor to complete this part of the job for you if you do not want to deal with cutting, hanging and clay yourself.
  • Paint the walls a color of your choice. Use a color roller to apply a primer to both interior and exterior walls. Wait until the primer dries, then paint over it with 1-2 coats of wall paint. [12]
      Build a recording booth Step 12.jpg
    • You may want to match the exterior wall color with the color of the walls you built the booth in so it looks more like part of the room. But you can paint it in a different color if you want it to stand out as an accent.
  • [ Edit ] Add the door and soundproof the booth

    1. Hang the door in a rough frame. Mount the door in the frame you built for it in one of the walls. Mount the door to the frame with the supplied hinges, hardware and screws. [13]
        Build a recording booth Step 13.jpg
      • If it's too hard for you to hang the door properly yourself, hire a carpenter to do it for you.
    2. Install strips of wood on the inside of the door frame to create a door stop. Close the door so that it aligns with the outside wall and then mark the position of the inner edge of the door all the way around the inside of the door frame with a pencil. Cut pieces of wood to fit around the sides of the frame, then nail them in place with the edges lined up along the marks you made on the inside of the frame. [14]
        Build a recording booth Step 14.jpg
      • The door stops will ensure that the door is closed properly and help you to soundproof the booth.
    3. Knit rubber-based foam band weather stripping around the door stops. Cut strips of rubberized foam tape weather stripping to the length of each strip of doorstop. Push them against the edges of the door stops facing the door. [15]
        Build a recording booth Step 15.jpg
      • This helps to soundproof the booth by ensuring a tight seal when the door is closed.
    4. Apply acoustic foam plates to all interior surfaces of the booth. Use a self-adhesive spray to install acoustic foam plates on all the mounting walls, as well as the inside of the door. Cut the foam plates to size as needed using a tool knife. [16] in size. Measure the total surface area of ​​the booth's interior walls to determine how many trays you need to cover it.}}
        Build a recording booth Step 16.jpg
      • If your door has any glass in it, do not cover the glass with acoustic foam.
      • The foam plates help keep the sound inside the recording booth to create good acoustics. This, together with the insulation in the walls and the weather stripping around the door, means that your booth should now be quite sound insulated and ready to record!

    [ Edit ] Warnings

    • Always wear thick work gloves when working with fiberglass insulation to protect your hands from glass panels.

    [ Edit ] Things You Need

    • Tape measure
    • Pen or pen
    • Paper
    • by timber
    • Power drill
    • Power saw
    • wood screws
    • Hammer
    • Nails
    • R-19 fiberglass insulation
    • Gloves
    • Utility knife
    • 19659009] Plaster
    • Gypsum saw
    • Gypsum mud
    • Gypsum screws
    • Gypsum screws
    • Paint roller
    • Paint washer
    • Inner door
    • Rubberized foam tape weather stripping
    • of lumber
    • Acoustic foam plates
    • Adhesive spray

    [ Ref Edit ] ↑ https://www.guitarchalk.com/building-recording-booth/
  • https://www.guitarchalk.com/building-recording-booth/
  • https://www.guitarchalk.com/building-recording-booth/
  • https://www.guitarchalk.com/building-recording-booth/ [19659103] ↑ https://www.guitarchalk.com/building-recording-booth/strong19659105vard↑ https://murrant.ca/murrant/build-a-professional-vocal-booth-on-a $ 500 budget /
  • https://www.guitarchalk.com/building-recording-booth/
  • https://www.guitarchalk.com/building-recording -booth / [19659108] ↑ https://www.guitarchalk.com/building-recording-booth/
  • https://murrant.ca/murrant/build-a-professional-vocal -booth-on-a-$ 500-budget /
  • https://www.thisoldhouse.com/walls/21016619/how-to-hang-drywall
  • https: // www. realsimple.com/home-organizing/home-improveme nt / painting / paint-wall
  • https://www.thisoldhouse.com/doors/21016617/how-to-hang-an-interior-door
  • [1945 https: // murrant.ca/murrant/build-a-professional-vocal-booth-on-a-500-dollar-budget/vud19659114achte↑ https://www.thisoldhouse. com / doors / 21018244 / the-essential -guide-to-weatherstripping
  • https://murrant.ca/murrant/build-a-professional-vocal-booth-on-a-500-dollar- budget /

  • Source link